Contactless Curbside Pick-Up Available!
{"id":4652649775185,"title":"Beta 27 Condenser Instrument Mic","handle":"beta-27-condenser-instrument-mic","description":"\u003cp\u003eThe Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources\u003c\/li\u003e\n\u003cli\u003eTailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm\u003c\/li\u003e\n\u003cli\u003eFlat, neutral frequency response for natural reproduction on stage or in the studio\u003c\/li\u003e\n\u003cli\u003e3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend\u003c\/li\u003e\n\u003cli\u003e-15 dB switchable attenuator handles extremely high SPLs with ease\u003c\/li\u003e\n\u003cli\u003ePremium electronic components and gold-plated internal and external connectors\u003c\/li\u003e\n\u003cli\u003eInternal pop filter with three separate mesh layers reduces wind and breath noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: Condenser (externally biased)\u003cbr\u003e\u003cbr\u003eFrequency Response: 20 to 20,000 Hz\u003cbr\u003e\u003cbr\u003ePolar Pattern: Supercardioid\u003cbr\u003e\u003cbr\u003eImpedance: 160 Ohm\u003cbr\u003e\u003cbr\u003eSensitivity (at 1 kHz, open circuit voltage):\u003cbr\u003e- -37 dBV\/Pa\u003cbr\u003e- 1 Pascal=94 dB SPL\u003cbr\u003e\u003cbr\u003eMaximum SPL (1 kHz at 1% THD):\u003cbr\u003e- 1000 Ohm load: 134 dB (148 dB, Pad on)\u003cbr\u003e- 2500 Ohm load: 140 dB (154 dB, Pad on)\u003cbr\u003e\u003cbr\u003eSignal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):\u003cbr\u003e- 85.5 dB\u003cbr\u003e- S\/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted\u003cbr\u003e\u003cbr\u003eDynamic Range (at 1 kHz):\u003cbr\u003e- 1000 Ohm load: 125.5 dB\u003cbr\u003e- 2500 Ohm load: 131.5 dB\u003cbr\u003e\u003cbr\u003eCommon Mode Rejection (20 Hz to 20 kHz): \u0026gt; 50 dB\u003cbr\u003e\u003cbr\u003eClipping Level (20Hz-20 kHz at 1% THD):\u003cbr\u003e- 1000 Ohm load: 2.0 dBV\u003cbr\u003e- 2500 Ohm load: 8.5 dBV\u003cbr\u003e- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL\u003cbr\u003e\u003cbr\u003eSelf-Noise (typical, equivalent SPL, A-weighted): 8.5 dB\u003cbr\u003e\u003cbr\u003ePolarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3\u003cbr\u003e\u003cbr\u003eWeight: Net: 428 g (15.1 oz.)\u003cbr\u003e\u003cbr\u003eSwitch:\u003cbr\u003e- Attenuator: -15 dB\u003cbr\u003e- Low Frequency Response: flat; -6 dB\/octave below 115 Hz; -18 dB\/octave below 80 Hz\u003cbr\u003e\u003cbr\u003eConnector: Three-pin professional audio (XLR), male\u003cbr\u003e\u003cbr\u003ePower Requirements: 48v DC phantom, 5.6 mA\u003c\/p\u003e","published_at":"2020-07-13T11:56:59-04:00","created_at":"2020-07-13T11:56:58-04:00","vendor":"Shure","type":"Microphone","tags":["Brand_Shure","Type_Microphone","Wired_Instrument"],"price":54900,"price_min":54900,"price_max":54900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32460603686993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SHURBETA27","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Beta 27 Condenser Instrument Mic","public_title":null,"options":["Default Title"],"price":54900,"weight":428,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/productionsupplies.ca\/cdn\/shop\/products\/BETA27.png?v=1594655819"],"featured_image":"\/\/productionsupplies.ca\/cdn\/shop\/products\/BETA27.png?v=1594655819","options":["Title"],"media":[{"alt":null,"id":7543123804241,"position":1,"preview_image":{"aspect_ratio":1.1,"height":1180,"width":1298,"src":"\/\/productionsupplies.ca\/cdn\/shop\/products\/BETA27.png?v=1594655819"},"aspect_ratio":1.1,"height":1180,"media_type":"image","src":"\/\/productionsupplies.ca\/cdn\/shop\/products\/BETA27.png?v=1594655819","width":1298}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources\u003c\/li\u003e\n\u003cli\u003eTailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm\u003c\/li\u003e\n\u003cli\u003eFlat, neutral frequency response for natural reproduction on stage or in the studio\u003c\/li\u003e\n\u003cli\u003e3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend\u003c\/li\u003e\n\u003cli\u003e-15 dB switchable attenuator handles extremely high SPLs with ease\u003c\/li\u003e\n\u003cli\u003ePremium electronic components and gold-plated internal and external connectors\u003c\/li\u003e\n\u003cli\u003eInternal pop filter with three separate mesh layers reduces wind and breath noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: Condenser (externally biased)\u003cbr\u003e\u003cbr\u003eFrequency Response: 20 to 20,000 Hz\u003cbr\u003e\u003cbr\u003ePolar Pattern: Supercardioid\u003cbr\u003e\u003cbr\u003eImpedance: 160 Ohm\u003cbr\u003e\u003cbr\u003eSensitivity (at 1 kHz, open circuit voltage):\u003cbr\u003e- -37 dBV\/Pa\u003cbr\u003e- 1 Pascal=94 dB SPL\u003cbr\u003e\u003cbr\u003eMaximum SPL (1 kHz at 1% THD):\u003cbr\u003e- 1000 Ohm load: 134 dB (148 dB, Pad on)\u003cbr\u003e- 2500 Ohm load: 140 dB (154 dB, Pad on)\u003cbr\u003e\u003cbr\u003eSignal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):\u003cbr\u003e- 85.5 dB\u003cbr\u003e- S\/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted\u003cbr\u003e\u003cbr\u003eDynamic Range (at 1 kHz):\u003cbr\u003e- 1000 Ohm load: 125.5 dB\u003cbr\u003e- 2500 Ohm load: 131.5 dB\u003cbr\u003e\u003cbr\u003eCommon Mode Rejection (20 Hz to 20 kHz): \u0026gt; 50 dB\u003cbr\u003e\u003cbr\u003eClipping Level (20Hz-20 kHz at 1% THD):\u003cbr\u003e- 1000 Ohm load: 2.0 dBV\u003cbr\u003e- 2500 Ohm load: 8.5 dBV\u003cbr\u003e- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL\u003cbr\u003e\u003cbr\u003eSelf-Noise (typical, equivalent SPL, A-weighted): 8.5 dB\u003cbr\u003e\u003cbr\u003ePolarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3\u003cbr\u003e\u003cbr\u003eWeight: Net: 428 g (15.1 oz.)\u003cbr\u003e\u003cbr\u003eSwitch:\u003cbr\u003e- Attenuator: -15 dB\u003cbr\u003e- Low Frequency Response: flat; -6 dB\/octave below 115 Hz; -18 dB\/octave below 80 Hz\u003cbr\u003e\u003cbr\u003eConnector: Three-pin professional audio (XLR), male\u003cbr\u003e\u003cbr\u003ePower Requirements: 48v DC phantom, 5.6 mA\u003c\/p\u003e"}

Beta 27 Condenser Instrument Mic

Product Description

The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.

  • Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
  • Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm
  • Flat, neutral frequency response for natural reproduction on stage or in the studio
  • 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend
  • -15 dB switchable attenuator handles extremely high SPLs with ease
  • Premium electronic components and gold-plated internal and external connectors
  • Internal pop filter with three separate mesh layers reduces wind and breath noise.

Type: Condenser (externally biased)

Frequency Response: 20 to 20,000 Hz

Polar Pattern: Supercardioid

Impedance: 160 Ohm

Sensitivity (at 1 kHz, open circuit voltage):
- -37 dBV/Pa
- 1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD):
- 1000 Ohm load: 134 dB (148 dB, Pad on)
- 2500 Ohm load: 140 dB (154 dB, Pad on)

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):
- 85.5 dB
- S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

Dynamic Range (at 1 kHz):
- 1000 Ohm load: 125.5 dB
- 2500 Ohm load: 131.5 dB

Common Mode Rejection (20 Hz to 20 kHz): > 50 dB

Clipping Level (20Hz-20 kHz at 1% THD):
- 1000 Ohm load: 2.0 dBV
- 2500 Ohm load: 8.5 dBV
- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL

Self-Noise (typical, equivalent SPL, A-weighted): 8.5 dB

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight: Net: 428 g (15.1 oz.)

Switch:
- Attenuator: -15 dB
- Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz

Connector: Three-pin professional audio (XLR), male

Power Requirements: 48v DC phantom, 5.6 mA

Sku: SHURBETA27
Vendor: Shure
$549.00
Maximum quantity available reached.

Related Products